MB86H20 Datasheet

This SmartMPEG is an integrated MPEG-2 settop- box decoder which includes the hardware extensions required to support a low Bill of Material for Set-Top- Boxes and IDTVs.

Highlights of the SmartMPEG include an ARC RISC CPU (@130.5MHz), two transport stream demultiplexers with integrated DVB descramblers, a PAL/ NTSC/SECAM digital video encoder and a display controller, which overlays up to four layers of graphic data. A specially designed, shared SDRAM memory interface for the CPU and MPEG decoder connects to a single SDRAM device using either a 16 or 32-bit data bus depending on customer bandwidth requirements. The included universal processor interface allows simple connection to FLASH, hard disk drives (IDE), Common Interface and other asynchronous devices.

The SmartMPEG is part of Fujitsu’s MPEG decoder family, and is the successor to the MB87L2250. The SmartMPEG offers several advantages over the MB87L2250, including support for 16/32-bit SDRAM devices up to 128Mbytes, an integrated S/P-DIF interface, DPLL, and internal audio DAC’s. This helps to reduce product cost by eliminating the need for external components. The SmartMPEG adds also DPLL functionality, SECAM encoding, and two Smart-card interface to former MPEG devices.

To help our customers achieve the shortest possible timeto- market, the SmartMPEG comes with the Fujitsu Driver Application Programming Interface (FAPI).

FAPI is a complete driver set, allowing fast and efficient customer software design. In addition, FAPI is now the standard programming interface for Fujitsu DVB components, easing migration to future devices.


The above info is from (http://www.seekic.com)

Features:
• MPEG2 video ISO/IEC 13818-2 (MP@ML...SP@ML)
• MPEG audio layer 1/2
• 32-bit RISC CPU (ARC Tangent A4 @130.5MHz)
• 4K I-cache, 2K D-cache
• Three timers / watchdog / power-down mode
• Shared memory interface (SDRAM, 16/32 bit data),
  64Mbit...1Gbit
• Universal processor interface (IDE, NAND/NOR
  FLASH & Common Interface)
• Two transport stream decoders (decoding/recording)
  including two DVB descrambler
• Flexible MPEG video resizing (factor 1/16 to 2)
• Display controller with up to 4 true colour graphic or
CLUT layers (total 6 layers)
• Flexible frame rate conversion (e.g. 50/60Hz)
• Flicker fixer for better on-screen text clarity
• Teletext / WSS / VPS / CC / VBID insertion
• PAL/NTSC/SECAM digital encoder
• RGB De-matrix (RGB or YCrCb output)
• Control of brightness, contrast and colour saturation of
  RGB and YCrCb output
• 5 video DAC’s @10bit for analogue video / audio O/P
• ITU-R 656 video input/output (shared with TS2 input)
• S/P DIF output for PCM/AC3/MPEG
• UART / 2 x Smart Card IF / I2C / GPIO / PWM Output
• 7-segment LED controller for 5 digits / KeyBoard mon.
• Infra Red receiver / transmitter
• On-chip DPLL, requiring only 27.0MHz crystal
• Bootable from NOR Flash or I2CPROM
• FPT-208P-M06 (LQFP-Package)
• Ambient Temperature Range (Std Pkg): 0oC to +70oC
• Advanced Technology: Fujitsu CMOS Cx81 (0.18μm)
• 1.8 volt device with 3.3 volt I/O
• Power consumption: typ. 700mW (Standby: 100mW)

The above info is from (www.seekic.com)

(Absolute) Maximum Ratings:


Edited by (www.seekic.com) ,the biggest IC PDF and datasheet download site.